Author Guidelines

The manuscript should be written in clear, concise and grammatically correct English. It is recommended that you ask colleagues to read over your paper prior to submission to ensure it is of a high standard and conforms to a high level of scientific writing. Authors may download a template from download section.

Online Submission 
Authors will be required to submit, MS-Word compatible (.doc, .docx), papers electronically after logging in at our portal and accessing the submit paper link, available at Online Submission. Once the paper is uploaded successfully, our automated Paper Submission System assigns a Unique Paper ID, acknowledges it on the screen and also sends an acknowledgement email to the author at her/his registered email ID. The authors must quote /refer the paper ID in all future correspondences.

Structure of Manuscript 
The manuscript should be presented in the following order.

Title should be Concise and informative. Avoid abbreviations and formulae to the extent possible.
Authors’ Names and Affiliations
Present the authors' affiliation addresses (where the actual work was done) below their names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and e-mail address of each author.

Corresponding author
Clearly indicate who will handle correspondence at all stages of refereeing and publication. Ensure that phone numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.

All manuscripts must include a brief but informative Abstract. It should not exceed 300 words and should describe the scope, hypothesis or rationale for the work and the main findings. The abstract should allow the reader to quickly have a clear idea about the rational for the work, the experiments conducted and the results of those experiments before reading the rest of the manuscript. Both common and scientific names should be included; the authorities are not given if they appear in the title. References to the literature and mathematical symbols/equations should not be included.

Key words (5-8) should be provided below the Abstract to assist with indexing of the article.

The Introduction should briefly indicate the objectives of the study and provide enough background information to clarify why the study was undertaken and what hypotheses were tested.
As a last paragraph of the introduction should provide organization of the paper/article (Rest of the paper is organized as follows, Section I contains the introduction of ……. , Section II contain the related work of ………, Section III contain the some measures of …….., Section IV contain the architecture and essential steps of ………., section V explain the ………… methodology with flow chart, Section VI describes results and discussion ….., Section VII contain the recommendation of ……… and Section VIII concludes research work with future directions).

Related Work 
In this section, the author describes the previous research works in the form of title, problem statement, objectives, not repeat the information discussed in Introduction.

Materials and Methods 
This section should be concise but provide sufficient detail of the material used and equipment and the procedure followed to allow the work to be repeated by others.

Results should be presented in a logical sequence in the text, tables and figures. Repetitive presentation of the same data in tables and figures should be avoided. The results should not contain material appropriate to the Discussion. All tables, graphs, statistical analyses and sample calculations should be presented in this section. Figures/Tables/Flowcharts/Equations/Formulas should draw the pictures himself. Please do not give scanned equation/formula.

The results should be discussed in relation to any hypotheses advanced in the Introduction. Comment on results and indicate possible sources of error. Place the study in the context of other work reported in the literature. Only in exceptional cases should the "Results and Discussion" sections be combined. Refer to graphs, tables and figures by number. This helps tie the data into the text in a very effective manner. Authors should also take future research and limitations into account in the Discussion section.

Conclusion and Future Scope
The main conclusions of the experimental work should be presented. The contribution of the work to the scientific community and its economic implications should be emphasized. In last paragraph author describes the future Scope for improvement.

Appendix (Define last page of paper)
If there are multiple appendices, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similar nomenclature should be followed for tables and figures: Table A.1; Fig. A.1, etc.

The source of financial support must be acknowledged. Authors must declare any financial support or relationships that may pose conflict of interest in the covering letter submitted with the manuscript. Technical assistance may also be acknowledged.

Funding Information 
The authors should acknowledge the funders of this manuscript and provide all necessary funding information.

Author Contributions 
Authors are required to include a statement of responsibility in the manuscript that specifies the contribution of every author. The level of detail varies; some disciplines produce manuscripts that comprise discrete efforts readily articulated in detail, whereas other fields operate as group efforts at all stages.

It is the Authors responsibility to ensure that the information in each reference is complete and accurate. Only published and "in press" references should appear in the reference list. Please ensure that every reference cited in the text is also present in the reference list (and vice versa). The references in the reference list should follow the standard ISROSET reference style of the journal and citation of a reference.

The ISROSET except book, journal, and conference papers only for citation; please do not use websites URL references in the references section.

  • Format for Journal Paper
    Example:1 S.K.  Sharma,  L. Gupta,  “A Novel Approach for Cloud Computing Environment”, International Journal of Scientific Research in Biological Sciences, Vol. 4, Issue.,12, pp.1-5, 2014
    Example:2 S.K.  Sharma,  L. Gupta,  “A Novel Approach for Cloud Computing Environment”, International Journal of Scientific Research in Biological Sciences, Vol. 3, No.,10, pp.10-25, 2013
  • Format for Book/Book Chapter
    Example:K. Gupta, “A Proposed New Approach for Cloud Environment using Cryptic rules”, ISROSET Publisher, India, pp. 542-545, 2016.  
  • Format for Conference Paper
    Example:  S.L. Mewada,  “A Proposed New Approach for Cloud Environment using Cryptic Techniques”, In the Proceedings of the 2016 International Conference on  Computer Science and Engineering, India, pp.542-545, 2016.

  • Invalid (websites URL) references remove or replaced by Journal references.
  • Add at least one reference paper from past IJCSE Issues.

Note- Please start references in text form [1], [2],[3],[4], [5],[6],[7],[8],[9],[10] that is increasing order. You have started references form [9],[1],[2],[3],[4],[7],[4],[5],[6]  this is not correct.

Author(s) Profile
IJCSE is now Publishing Biographies with Photographs of authors at the conclusion of every published article. For every author on a given paper, it is required that a biography no longer than 100 words be included at the end of the paper. Author biographies should be ordered according to the order of authors on the paper.

For Example:
Mr. Lee Tumit pursed B.S., M.S., and Ph.D. Physical Science from IIT, Bombay in 1998, 2002 & 2008. He is currently working as Professor in Department of Physical Science from IIT, Bombay since 2010. He is a member of ISROSET 2013, Life member of ACM since 2011. He has published more than 50 research papers in reputed international journals including Thomson Reuters (SCI & Web of Science) and conferences including IEEE and it’s also available online. His main research work focuses on science, engineering and technology. He has 15 years of teaching experience and 10 years of research experience.

Tables should be self-contained and the data should not be duplicated in figures. Tables should be numbered consecutively. Each table should be presented on a separate page with a comprehensive but concise legend above the table. Tables should be double-spaced and vertical lines should not be used to separate columns. Column headings should be brief, with units of measurement in parentheses.

Only necessary illustrations should be included. All illustrations (line drawings and photographs) are classified as figures. Figures should be cited in consecutive order in the text. Figures should be sized to fit within the column or the full text width. Line figures should be supplied as sharp, black and white or color diagrams, drawn with a computer graphics package. Photographs should be sharp and magnifications should be indicated on photographs using a scale bar. Graphics should be supplied as high-resolution (at least 300 dpi) electronic files. Digital images supplied as low-resolution cannot be used and will not be accepted. The legend should incorporate definitions of any symbols used and all abbreviations and units of measurement should be explained so that the figure can be understood without reference to the text.
  • Tables and Figures should be in MS Word or Excel. Number and Caption for Tables and Figures must write outside the Tables and Figures. All the matter inside the Tables and Figures should be typed in Times New Roman, Font size - 10 point, Do not bold and Italic.
  • Mention only Figure. Do not write Map/Graph/Photo/Plate/Diagram/Picture/FlowChart/ Chart/Etc. Mention numbering of Figures/Tables/Scheme/Equations/Formulas must be 1,2,3,4, not write 1.1, 2.2......
  • Submit Figures/Charts/Graph/Flow Chart/line diagram/Tables etc. should be in MS Word/Excel and images in JPG only.
  • Equation/Formula should be in MathType so that it will be formatted. Do not give scanned equation/formula. Write numbers (1,2,3,4,5…) and caption outside of equation/formula. All equation/formula should be typed in Times New Roman, Font size - 10 point. Do not give bold and italic equation/formula.
  • Take the permission from the copy right holder for using the copy right materials like Tables, Figures, Diagrams, Photos, Graphs, Pictures etc. Mention the source for all such type of materials at the bottom of the Tables and Figures.
Abbreviation and Units 
SI units as outlined in the latest edition of Units, symbols and Abbreviations: A Guide for Medical and Scientific Editors and Authors (Royal Society of Medicine Press, London), should be used wherever possible. Statistics and measurements should always be given in figures; except where the number begins the sentence. When the number does not refer to a unit measurement, it is spelt out, except where the number is greater than nine. Use only standard abbreviations. The word Figure should be shortened to Fig. unless starting a sentence.

Copy Right
Copyright of all accepted papers will belong to ISROSET and the author(s) must affirm that accepted Papers for publication in ISROSET must not be re-published elsewhere without the written consent of the editor. To comply with this policy, authors will be required to submit a signed copy of Copyright Transfer Form, available at “Download Section” after acceptance of their paper, before the same is published.

Review Process 
All manuscripts submitted to ISROSET Publications undergo extensive evaluation while it is in the peer-review process.  

Manuscript Revisions 
Once the final review is completed, the author will be required to resubmit the revised manuscript using a journal template. The final Revised Manuscript will be sent via e-mail as a PDF/DOC file and should be returned within 5 days of receipt. Alterations to the text and figures (other than the essential correction of errors) are unacceptable at proof stage and authors may be charged for excessive alterations.

If you have any questions please feel free to contact us:

Authorization Required


You do not have rights to view the full text article.
Please contact administration for subscription to Journal or individual article.
Mail us at or view contact page for more details.

Impact Factor

Journals Contents

Author & Reviewer


Digital Certificate

Go to Navigation