Comparative Study on Mechanical Properties of SiC and Al2O3 Reinforced in Al6061 Matrix by Stir casting

Satheesh.M ¹ , M.Pugazhvadivu ²

Section:Research Paper, Product Type: Isroset-Journal
Vol.6 , Issue.5 , pp.1-6, Oct-2018

CrossRef-DOI:   https://doi.org/10.26438/ijsrpas/v6i5.16

Online published on Oct 31, 2018

Copyright © Satheesh.M, M.Pugazhvadivu . This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
 

View this paper at   Google Scholar | DPI Digital Library

XML View     PDF Download

How to Cite this Paper

672 Views    293 Downloads    150 Downloads

Abstract :
Usage of aluminium based metal matrix composite is unavoidable material for many engineering applications especially to weight – strength ratio needed. In this paper, the comparative study has been done for micro-structural and mechanical characteristics of Al6061 metal matrix reinforced with Silicon Carbide (SiC) and Aluminium Oxide (Al2O3) discretely. Test specimens were fabricated by adding 0, 5 and 10 wt % of SiC and Al2O3 in Al6061. Stir casting method used for the preparation of Al6061 composites. Morphology of the reinforcement particles and fabricated part was studied by SEM and Optical Microscope respectively, to analyze the distribution of particles in the Al6061 composite. Mechanical properties such as hardness, tensile and yield strength were carried out as per ASTM standards. The result proved that the density of composite is increases by increasing wt% of reinforcements in the matrix. The hardness value of SiC reinforced composite is higher than that of Al2O3 reinforced composite. Also the result shows that the maximum tensile strength at 5% wt of Al2O3 and SiC composite were identified.

Key-Words / Index Term :
MMC, Stir casting, Al 6061, SEM, SiC, Al2O3 ,Tensil strength

References :
[1] M K Surappa., “Aluminium matrix composites: Challenges and opportunities”.Vol. 28, pp. 319–334, 2003
[2] M. K. Aravindan, K. Balamurugan, G. Murali., “Effect of reinforcement of AL-6063 with SiC on mechanical behavior and microstructure of metal matrix composites”. © Applied Science Innovations Pvt. Ltd., India Carbon – Sci. Tech. vol. 6/2 388 – 394, (2014)
[3] Y.C. Feng, L. Geng, P.Q. Zheng, Z.Z. Zheng, G.S. Wang., “Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting”. Materials and Design vol. 29 2023–2026, (2008)

[4] Gopal Krishna U B, Sreenivas Rao K V & Vasudeva B.. “Effect Of Boron Carbide Reinforcement On Aluminium Matrix Composites”. International Journal of Metallurgical & Materials Science and Engineering (IJMMSE). ISSN 2278-2516. Vol. 3, 41-48, 2013
[5] Ulhas .K. Annigeri, G.B. Veeresh Kumar. “Method of stir casting of Aluminum metal matrix Composites: A review”. Materials Today: Proceedings 4, 1140–1146 , 2017
[6] K.M. Sree Manu, L. Ajay Raag, T.P.D. Rajan, Manoj Gupta, and B.C. Pail “Liquid Metal Infiltration Processing of Metallic Composites, A Critical Review”.. The Minerals, Metals & Materials Society and ASM International DOI: 10.1007/s11663-016-0751-5, 2016
[7] Bharath V, Madev Nagaral, V Auradib and S. A. Kori., “Preparation of 6061Al-Al2O3 MMC’s by Stir Casting and Evaluation of Mechanical and Wear Properties”. © 2014 The Authors. Published by Elsevier Ltd. Procedia Materials Science vol. 6, 1658 – 1667, 2014
[8] Pardeep Sharma, Satpal Sharma & Dinesh Khanduja., “Effect of Graphite Reinforcement on Physical and Mechanical Properties of Aluminium Metal Matrix Composites”. http://dx.doi.org/10.1080/02726351.2015.1031924
[9] S.A. Sajjadi, H.R. Ezatpour, H. Beygi, “Microstructure and mechanical properties of Al–Al2O3 micro and nano composites fabricated by stir casting”. Materials Science and Engineering A vol. 528 , 8765– 8771, 2011
[10] David Raja Selvam. J, Robinson Smart. D.S. Dinaharan, “Synthesis and characterization of Al6061-Fly Ashp-SiCp composites by stir casting and compocasting methods”. Energy Procedia vol. 34, 637 – 646, 2013
[11] S. B. Rayjadhav, Dr. V. R. Naik., “Characterization Of Developed Al 6061-SiC Metal Matrix Composites Produced By The Stir Casting Method”, Isbn-978-81932074-5-1
[12] K.K. Alaneme, B.O. Ademilua,, M.O. Bodunrin, “Mechanical Properties and Corrosion Behaviour of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Bamboo Leaf Ash”, Vol. 35, No.1, 25‐35, 2013
[13] Dora Siva Prasada, Chintada Shobab, Nallu Ramanaiah, Investigations on mechanical properties of aluminum hybrid composites, j mater restechno l ;3(1):79–85, 2014

[14] S.A. Sajjadi, H.R. Ezatpour, H. Beygi, “Microstructure and mechanical properties of Al–Al2O3 micro and nano composites fabricated by stir casting”. Materials Science and Engineering A vol. 528 ,8765– 8771, 2011
[15] A.Radha, K.R. Vijayakumar, “An investigation of Mechanical Properties on Aluminium 6061Reinforced with Silicon Carbide-Metal Matrix Composites”. doi:10.4028/www.scientific.net/AMM.787.568
[16] P.Lakshmikanthan, B.Prabu, “Mechanical and tribological beheaviour of aluminium Al6061-coconut shell ash composite using stir casting pellet method”, Journal of the balkan tribological association,
vol-22, pp 4008–4018, 2016.